This slitting machine is suitable for slitting and rewinding of various super large coil materials, such as 150g / m2-800g / m2 cellophane, bill paper, double-sided adhesive tape, PVC, OPP, pet, etc. Next, we will briefly introduce the maint...

Belt conveyor is a kind of machine and equipment used to produce belt or similar belt products. According to the tape substrate, coating liquid properties, processing requirements, etc., the structure and configuration of belt conveyor are o...

Tape production process 1. The whole process of belt production is as follows: The width of plastic film is about 1.3m According to the use of tape. Then choose different plastic particles and add some special additives 2. After blowing the ...

Specific steps of belt production process 1. Add raw materials: Tape production equipment in the tape production process, the first thing to do is to add tape raw materials, such as: acrylic acid. 2. Emulsification tank: Then the raw materia...

How to use the production equipment of belt conveyor? Before installation, all parts of the belt production equipment are separated. After the site is selected, place the front and rear intermediate frames on the horizontal ground to maintai...

How much does it cost to open a small tape factory? To set up a belt factory, you need to invest more or less according to the size of your regional market and your own investment strength. Generally, you can start a factory with about 30000...