This slitting machine is suitable for slitting and rewinding of various super large coil materials, such as 150g / m2-800g / m2 cellophane, bill paper, double-sided adhesive tape, PVC, OPP, pet, etc. Next, we will briefly introduce the maintenance of the slitter.
In addition to lubricating the machine, the slitter of Jiansheng production shall perform the following inspection and maintenance every week:
1. Check the thickness of the brake friction plate of the slitter, and replace them when the wear is severe;
2. Check whether the linear guide rail of the slitter is clean, and clean them if necessary;
3. Check whether the driving belt of the slitter keeps its proper tension;
4. Check whether there is air leakage in the air path of the slitter and whether the air filter is clean. Clean the filter element at least once a month;
5. Check the surface of all rubber covered rollers of the slitting machine, and do not contact with the slitting tool to avoid damaging its surface. Remember to wipe the roller lightly with 1 liter of cleaning solution (generally with warm water and soap or solvent with low surface tension) every week;
6. Check the filter of the air extraction fan of the slitting machine. If there is too much dust, and it is not clean, replace it in time;
7. When the roller is dirty, it can be scrubbed with industrial alcohol dipped in spinning cloth, but pay attention not to wipe some old parts of the slitter with alcohol, so as not to cause rust.

Slitting machine is a kind of mechanical equipment of paper tube. Slitting machine is mainly used for slitting paper products. It is easy to use and has high efficiency. It is an indispensable link in paper tube consumption. Slitter, however, Slitter also has a weak side, so in the use of the time, Zui can take good care of, a good nutrition slitter.
The manufacturer with Slitter must take time out of his busy schedule to stop the regular maintenance of slitter: keep the machine clean at any time. If the machine is not used for a long time, all parts of the machine should be cleaned and rewinder should be covered with protective cover. Regularly check the lubricating parts and add oil in time (such as motor and runner). Regularly check whether the parts of the machine are loose and worn, and repair them in time.
In the use of time, to be in good accordance with the working principle of the slitter to stop, to stop according to the nature of the work, can not be arbitrary, arbitrary: do not understand the machine structure and performance and operating procedures, stop using, operating the machine. Employees must receive training before taking up their posts. Under the guidance of the team leader, they should be trained how to use the machine, understand the structural principle of the machine and understand the safety protection. Employees must adhere to a good physical state in operation, and shall not chat with others, so as to avoid accidents caused by shifting vision.
When cutting the paper tube, it should be aligned with a certain distance, and then it can be cut only after releasing the inspection machine, so as not to hurt the hand. When working, if the machine is abnormal, stop the machine immediately for inspection and find relevant personnel for disposal. During the operation of the machine, employees are not allowed to leave their posts without permission, and the power must be turned off when they are separated.