Matters needing attention in using Xiangqi automatic cutting table

1. Ensure that the voltage, current and hydraulic equivalent are correct and stable before startup.

2. Before the equipment is ready for operation, all personnel must be informed to leave the equipment to ensure personal safety.

3. During operation, do not touch the film roll or roll core with hands, so as to avoid personal injury.

4. During operation, do not scratch or cut the roller core with knife or hard object.

First package: before the equipment is put into operation, check whether the working positions are properly adjusted, and the parts to be lubricated should be filled with lubricating grease in advance. Check that the tool is sharp.

After everything is normal, the machine can run empty first to check whether there is any abnormality, and input the order to be processed into the computer for inspection in advance; after the equipment is put into operation, the best working condition of the equipment should be adjusted in time according to the production situation to ensure that the indentation of the slitter is moderate, the slitting is free of burr, and the trimming position on both sides is appropriate. To ensure the smooth feeding and discharging of the crosscutting machine and the accurate cutting length, the operation of the crosscutting machine combined with the production management should also be monitored constantly to avoid paper blocking and defective products;

After the completion of the work, clean up the dust and paper scraps on the equipment in time, check the grinding wheel, drain the water in the oil and water heater and the air tank, and check whether the operation parts are abnormal. Then, cut off the power according to the operation instructions and maintain the computer operating system.

Shanghai Xiangqi mechanical and Electrical Equipment Co., Ltd. is a professional manufacturer of BOPP tape, double-sided tape, kraft paper tape, masking paper tape, cloth base tape, PE protective film tape, PVC electrical tape, PET polyester tape and other adhesive products: coater, Slitter, threading machine, pipe cutter, large rewinder, sheet, etc, Double axis automatic cutting table, small rewinder, aluminum mold, coiling shaft, bushing, gasket, tension bar, small spring, head paper, packaging film and other packaging machinery and accessories. And responsible for equipment installation, debugging, repair and maintenance.