1. Longitudinal stripe It is mainly manifested as the formation of circumferential rib like stripes on the surface of the roll. In the process of slitting and winding of high-speed Slitter, a large amount of air entrainment and poor toleranc...

1. Before starting the machine, the signal must be sent out to confirm that it is correct 2. When unloading the paper, turn the paper unloading rack to 90 degrees as the safety board, and no one is allowed to stand in front of and behind the...

1) Each part of the belt slitter is controlled by a centralized panel, which is easy to operate. 2) Feeding mode: feeding at the back, convenient for feeding and adjusting the position of raw materials; bow shaped unfolding wheel: the unfold...

Slitting machine is used for slitting strip into several required specifications. This paper summarizes the work of slitting machine for reference, hoping to be helpful to you. 1. Constant tension control principle The essence of constant te...

For the paper processing industry, the belt slitter is a very important equipment, which is used almost every day. If there is a failure, it will hinder the production process and reduce the production efficiency. Therefore, the daily mainte...

What is belt Slitter In packaging machinery, we often see tape slitting machine to cut the coil into several required specifications. Tape cutting machine produces BOPP / kraft paper / trademark paper / cloth / PET / release paper and other ...