Before operation, check the main parts of the automatic Slitter and add lubricating oil; when checking and disassembling the automatic Slitter, it is forbidden to use improper tools and select unscientific operation methods; clean and check the machine every two weeks; if the automatic Slitter stops for a long time, it is unnecessary to scrub and clean all bright surfaces and apply anti rust oil, Cover the whole machine with plastic cover. If the automatic cutting table has been out of service for more than 3 months, the anti rust oil shall be covered with moisture-proof paper; after the operation, the equipment shall be cleaned carefully, the exposed friction surface shall be scrubbed and cleaned, and the lubricating oil shall be added. Belt Slitter

To do a good job in the daily maintenance and protection of the slitter, the following five points should be done well.
First, the electrical part should be cleaned and checked regularly to eliminate the danger in time.
Second, the use of slitting machine is completed by slitting machine and crosscutting machine. Therefore, high quality slitting knife and crosscutting knife should be used.
Third, the daily maintenance of the slitting machine should be in place. The rope ruler should be lubricated, cleaned and cleared (dust-free and debris free) to ensure that the sliding parts of the equipment are in excellent condition.
The fourth is the protection operation. The rotating parts should be checked regularly and irregularly (especially the vulnerable parts should be monitored in real time). Implement timing adjustment, timing change, commutator and make detailed records, so as to extend the service life of the equipment.
Fifthly, improve the skill quality and degree of the personnel who operate the slitting machine. The operation of the control part should be performed by a specially assigned person. No one is allowed to operate without permission.
Shanghai Xiangqi mechanical and Electrical Equipment Co., Ltd. is a slitter manufacturer, belt machine manufacturer, specializing in the production of automatic cutting table belt Slitter Slitter slitter / slitter / rewinder and so on. Welcome to consult!